Home
Company Info
Contact Us
Sales Terms
Privacy Policy
Kitty Cat
Predator Swap Parts
Brakes/Throttle
Chassis Parts
Clutch Parts
Drive Train
Engine Parts
Fuel System
Hardware
Hoods & Seats
Skis/Steering
Technical Services
& Engine Work
Track/Suspension
Traction/Control
Tools
Service Manuals
Polaris 120
Clutches & Parts
Drive Train
Engine Parts
Slides/Track
Tools
Traction/Control
Arctic Cat 120
Clutches
Drive Train
Engine Parts
Slides, Idlers, Track
Tools
Traction/Control
Parts Diagrams
Favorite Links
Ice Racing:
>Kids Pro Ice
>KCPRO-East
>WI Kids Snowmobile
>WI Kitty Cat Racers
SnoX Racing:
>286 Sno Series
>KCPRO-West
Other Links
>KittyCatSnowmobiles
Message Board
>FB Kitty Cats
>FB 120 Sleds
|
|
Polaris Traction & Control
Studs and Backers
120 Track Clips (1" and ISR LEGAL)
- 1" track clip for use on all 120cc snowmobiles.
- Has 1/2" tall guide on side with extra wide base.
- Note in the pic the clip with the 1/2" side is to the inside of the track. Some people install them on the outside as well, but check the fit first.
- This track clip is made specifically for 120s and has a short, yet wide, guide that does not interfere with the track drivers. This is the best track clip to use on all 120s. Compare against our competition and you'll find theirs are too tall and require the top 1/8" or better to be ground or cut down. Same with the long tail, whether it's squared or round, its too long and can interferes with idlers and/or studs. Most of the time these tails need to be ground down to be shorter. Our track clip eliminates both problems.
|
Click Picture to Enlarge
|
Hooker Plates
- Small square plate with single 1/4-20 tapped hole for hooker stud.
- Contact us if you need a double hole plates, hooker studs, or any other hooker related products.
- We will list hooker studs here soon.
|
Click Picture to Enlarge
|
Ski Race Carbides
-
Woody's race carbides are the only choice for top
performance.
-
Carbide is mounted to race bar, and race bar is
shaped the same as the carbide. This is important for
resharpening the carbide so there is no requirement to grind of lots
of metal in order to get to the carbide like you find with round
carbides.
-
Since Woody's no longer offers a 5" race bar,
Olson Brothers Dist stocks 6" carbides.
If you have another size requirement, please contact us as we will
be able to get it for you.
-
NOTE: Woody's only sells carbides by the
pair, but as a convenience to our customers we break them into
individual carbides so if you only need one carbide you don't have
to buy two. The price is the same whether you buy two
individual carbides or a two pack. We do not raise the price
for breaking the pack.
|
Click Picture to Enlarge
|
|